Roof Replacement – Are There Any Maintenance Issues?

Many homeowners are often concerned about whether or not to have their roofs replaced. This can be an expensive and complicated procedure, but the benefits of having your roof replaced greatly outweigh the extra cost and hassle. One of the most noticeable benefits is the dramatically improved energy efficiency. If you want to know why this is so important, look at how your roof is insulated. It is quite cold in the winter and very warm during the summer, making your home’s heating and cooling costs high.

Unfortunately, the cost of roof replacement far exceeds the cost of replacing damaged roofs. The most common cause of leaks is a puncture or leak in the membrane that covers the roof. Other causes of leaks include loosening of screws or nails, settling heavy timbers, and structure failure. When you repair these leaks, you can often stop leaks before they start, saving you hundreds of dollars.

Another benefit of roof replacement is that your home will look much better. After a thorough inspection, most inspectors will tell you that they are happy with the condition of your house, but this is only true if you choose an experienced and reputable company to perform the job. A simple reroof installation may do more to improve the look of your home than a new roof covering system.

There are many benefits from roof maintenance, including improved water resistance and less damage from high winds and hail. By following a regular maintenance schedule, you can often avoid problems that could be more expensive to repair. Regular roof maintenance will also help ensure that your water shield lasts a long time and protects you from damage caused by leaks or broken shingles. For more information on the services, visit

As you consider roof replacement, there are two basic kinds: single layer and multi-layered. With single-layered roofs, you replace just the top layer of shingle. Multi-layered systems can include a second layer of shingle or wood and a protective layer of asphalt. Most companies use a single-payer system because it is less expensive to install than the more expensive multi-layered options. However, even with a single layer, you can still have great roof repair and maintenance since you only need to replace one layer at a time.

When you compare a good-condition asphalt roof replacement with a roof replacement that has a faulty or worn-out layer of asphalt, you usually find that a newer system costs less. Even a good-condition system that is slightly worn may cost less than one damaged through weathering and a leak. When you add in the cost of roof replacement for leaks, repairs, and other roof issues, you will probably find that a newer roof replacement system can save you money.

When you hire a roofing contractor to install a new roof system, be sure to ask about roof maintenance and repair. Whether you need repairs due to wear and tear a leak, or other problems, the contractor should be able to provide this. It is important to know whether the installation included sealants and whether they are included in your roof replacement. If you choose to install a different sealant, it is good to determine what kind the previous supplier used. Sometimes different suppliers produce sealants that are of a different quality and performance level than one another.

Roof maintenance and repair are an important part of keeping your new roof in good condition. Even when you hire a professional roofer, you should still get a certificate describing how the roof was constructed and installed and a guarantee that the job has been done correctly. Be sure that you understand any terms mentioned in the contract with your contractor. It would be best if you also considered asking for referrals from friends or business owners you have previously used to get your roof maintenance and repair questions answered.

Stucco Repair Mix – The Essential Guide

stucco repair

Stucco is a durable material that withstands years of wear and tear, providing homeowners with a structure that looks great and lasts for many years. However, even with the durability of stucco, it can still suffer from wear and tear if certain elements are not addressed. Common issues include buckling, flaking, peeling, cracking, and cupping. When these problems are noticed, stucco repair should be considered. Stucco Repair Tampa will consider these factors before beginning any repairs on your home’s exterior.

The primary method of repair for minor stucco patch cracks is to fill the area with polyethylene or other similar resins. These substances help protect the surface and make it easier to apply a finish. After the resin has set, sand the area lightly until you are left with just a tiny edge of the crack. Apply a thin, sanding coat of repair compound and smooth out the crack until it is nearly invisible. Most finishes will require a couple of coats to get the desired finish on the area.

Even when stucco failure is minor, some areas may need more than a single coat of repair. Typically, there will be a good deal of water damage in such a case, so that more stucco repair may be needed. First, clean up the area to get rid of all the excess water. If there was any water damage to the structure, remove it and salvage the lumber. If it is not salvageable, the area will need to be scraped clean with a garden tool and a wet/dry vac.

A majority of stucco repairs are best left to a professional company. However, if you choose a do-it-yourself repair, you still need to follow specific guidelines for stucco remediation. For example, repairing areas with visible water damage requires applying a borate-based stain to the area. Also, patching up weak areas can be done using a metal-based patching compound and a penetrating solvent. It is important only to use solvent-based patching compounds as these have far fewer adverse effects on the surrounding area than solvent-based solutions.

For patching cracks in the wall, apply a patching compound that is non-porous, penetrable, and borate-free. Do not use a borate-free finish, as this could increase the risk of mold and mildew formation in your repaired area. Apply a patching compound to an area using a stipple pattern, running the solvent tip in a straight line, or tapping the repaired area dry with a drywall trowel. Patience is the key in the application process, as the faster the repair is finished, the less likely it will be noticed by others passing by.

Cracks in the floor or ceiling are easier to repair, as they often have a water damage origin. However, it is important to make sure the water damage originates from a leaky pipe first. Once the water damage origin has been identified, patch the leak using a suitable waterproof coating. After patching, apply a stucco finish that is appropriate for the situation.

Cracks in the floor or ceiling are often caused by wooden framing being pulled down. If this is the case, apply a wood protective coating or put carpets up before repairing. If your repair needs to be done in the future, use a new base coat over the existing base coat, if necessary. A repair done without a base coat stucco may tend to flake, peel or break into tiny pieces. The wood protective coating can prevent this from happening.

Before working on stucco repair, you should also clean the area to be repaired thoroughly using mild detergents and cleaners. Then dry with a good quality soft cloth and finally apply the stucco using a brush or roller. Work with even pressure and do not rush through the process. You will soon notice the excellent finish that will come from the mix.